The weight of one hanger is 11.9 lbs and they always come as pair.
They are 30" long without the mounting plate.
This is the mounting plate with the bolts which also holds the spring inside the hanger.
The distance of the bolts is 2-1/2", center to center.
You need to check your previous hangers for the bolt distance to see which one you need.
They are also available with 1-1/2" and 2" bolt pattern.
The holes for the mud flaps are approximately 6-1/2", center to center.
The reflectors are D.O.T. approved.
This is the bolt which holds the spring inside the hanger.
A view of the bolt inside holding the spring in place.
The hangers have open ends and they measure 2".
Here is a drawing with the dimensions of the hanger.
The hangers can be found here:
430 Polished Stainless Steel with 2 1/2" Bolt Pattern
430 Polished Stainless Steel with 2" Bolt Pattern
430 Polished Stainless Steel with 1 1/8" Bolt Pattern
304 Polished Stainless Steel with 2 1/2" Bolt Pattern
Chrome with 2 1/2" Bolt Pattern
Replacement spring for the hangers
End Caps
Watch on YouTube:
More Info Here.
Mud Flap Hanger with Reflector and 2 1/2 Inch Bolt Pattern in Chrome