This is the Dome Front Axle Cover with 33mm Spike Thread-on Lug Nut Covers.
They are very shiny and reflective.
This is the Front Axle Cover with Pointed Center Cap:
They are made of injection molded ABS plastic that is high-impact, light-weight, and corrosion resistant with a beautiful chrome plated finish with triple chrome plating process.
This is the dome hub cap without the lug nut covers.
This is a pointed hub cap with the spike lug nut cover mounted on a Big Rig tire.
They fit most 20", 22-1/2", and 24-1/2" wheels with 11-1/4" bolt circle/center applications.
The weight of the hub cap alone is 0.9lbs.
The outer diameter is around 13-3/4".
The center cap can be removed.
But do not use any hard tool like a screw driver.
It will damage the chrome.
Instead, use something like this.
The length of the spike lug nut cover is around 4-3/4”.
They are threaded and fit 33mm lug nuts.
The length to the thread is a little bit more than 1” and a minimum of 3 threads extending through the top of each nut is required for proper installation.
Therefore, the bolt should be at least 1-1/2” longer.
Here is a drawing of the lug nut cover with measurements.
Because they are so shiny, you will see any fingerprints.
Just use a microfiber cloth and wipe it off.
This is the dome rear axle cover to fit with the front one.
This is how they look inside.
They are around 5-1/2" deep
and have a diameter of around 9-1/4".
The total outer diameter is around 13-3/4".
Watch on YouTube:
More Info Here.
33 mm Thread-On Dome Front Axle Cover Set with Spike Nut Covers in Chrome